A Hybrid Table Saw is a good choice if you’re looking for a stronger table saw or a way to start your own shop. They are a mix between the more expensive cabinet table saw, and the contractor table saw.
You might have some general questions about the best hybrid table saw for your shop. We covered table saws below, this will help you find the best hybrid table saw , as well as what to look for when purchasing a hybrid table saw.
Looking for general information about table saws and other tools? Check out our complete resource guides on Miter Saws, Table Saws, Chainsaws, Band Saws and Circular Saws. These guides contain all the information that you need. You will be able to find history, the differnt types of the tool, top brand sold, and more!
Hybrid Table Saw Reviews
The Grizzley G0771Z table saw is the best on the market. It has a solid set up and weighs less than 136 kg. Even with 2 hp, it cut hardwood easily.
Things We Liked
- The miter slots are almost identical in accuracy and parallel!
- It is a great value for money. The saw is well calibrated and very easy to set up.
- Pre-wired for 120V, so no need to rewire.
- Cast iron wings that allow you to attach other table wings, like a router table.
Things We Didnt Like
- The screws on the motor casing are not Philipss, even though the manufacturer claimed they were. This may seem minorm but I had to waste time trying to figure out where the casing screws were.
- It doesnt fit well on a mobile base. It isn’t really designed for this, but it would be great.
Best For
Home woodworker who enjoys woodworking at home. This is the ideal tool for small projects around the house and in the garage. Its rip capacity is great for any home projects or backyard furniture making.
Best Hybrid Table Saws Below
The Fox Open table Hybrid Table saw is the best one under This 120/240 V motor can run on a standard 120 v electric plug that is found in most households. The extension table gives you a 76 cm right, rip capacity, which is hard to beat.
Things We Liked
- It is lightweight compared to other hybrid table saws. This one only weighs about 113 kg.
- The fine cuts are really fine, I have used this one for hardwood floors, and It does an amazing job.
- It is solid. It doesnt feel cheaply made and locks tightly in place.
Things We Didn’t Like
- It takes a lot of time to assemble. Some people report taking up to two hours.
- You need to be able to adjust the table properly, or the tabletop will look off.
Best For
This saw is best for a first-time buyer who doesnt want to invest a whole bunch of money into a hybrid table saw. This saw is ideal for use around the home. You can even use it on heavy-duty remodeling projects.
Delta Hybrid Table Saw
The Delta UniSaw machine is well built. With a 52 in fence capacity, it makes ripping boards extremely easy. If you require more horsepower, there is an option for a 5hp model.
Things We Liked
- It cuts with a greater accuracy than most table saws.
- It won’t get bogged down by hardwoods like maple or oak.
- This riving knife is the best I’ve seen.
Things We Didn’t Like
- It requires a 240 outlet and a 30amp fuse. If you don’t have one, it will be an additional cost.
- The whole saw is 272kg and it is difficult to move. This must be stationary.
Best For
Small cabinet makers, or as the last hybrid table saw you intend to buy. You have to add wiring and a breaker if you dont have a 240 v 30 amp socket in your garage already. This saw is ideal for home cabinet makers or anyone who works with large wood pieces.
What Exactly Is A Hybrid Saw?
In simple terms, the hybrid saw is a mix between the more expensive cabinet saw, and the less expensive contractor saw. A contractor saw is a stationary smaller table saw, or sometimes even what is known as a Job site Table saw.
The majority of hybrid saws need to be mounted on a cabinet to function and can be used in your workshop. This type of saw is ideal for moderate cutting if you are a hobbyist or cabinet maker.
Things To Consider Before Purchasing A Hybrid Saw
There are a number of different factors that go into deciding what saw to purchase. We have listed some things that you should know before purchasing.
Table Space
You need to consider the tablespace you have in your shop. The amount of space you need to safely cut a piece of wood is going to determine the size of the hybrid saw you need. A 20 x 56 cm tablespace will work well for most small areas. You can also add an extension to help keep the wood level as you cut it.
Rip Capacity
The highest rip capacity is on the right side of the blade, and depending on what type of wood you are cutting, you will need a higher rip capacity. You can increase your rip capacity by adding a stable extension to your table and increasing the tablespace.
Cut Depth
It is important to think about how deep the saw blade can be cut. Most Hybrid Table Saws can cut through 10cm of wood with a blade length of 30cm. It can cut down to 8 cm if it has a 25cm blade.
Information For Companies
Delta
Delta is known for its innovative products, superior quality and long-lasting power equipment. Theyre a smaller company that chooses to dedicate its resources to giving you that personalized customer service. Delta is well-known for its scroll, saws and drills that can be found in nearly every woodworking shop across the globe. Delta generally has a 5-year warranty on all new products and provides a technical support line for troubleshooting any issues that you may have.
Grizzley
Grizzley Industrial has made some great strides since founded in 1983. They can be found in many machine shops, and make high-quality machines. They only have two showrooms in the country, one on the west coast, and one in the mid-south. If you need to reach Grizzley, you’ll be speaking with a U.S.-based person. They also have a section of F.A.Q.
Best Hybrid Table: Our Take
We are proud to recommend the Grizzly Industrial G0771Z as our top pick. Its low price and high value makes it an excellent choice over other saws. There are better saws out there, however for home use, the Grizzly is by far the best value for your money.
The Fox Open table is a great alternative to the Grizzly if you are looking for something a bit more affordable. If you don’t mind the aluminum fence and cheaper tabletop, it usually runs below and is perfect for home use.
